Woodworking boring machines produce precise holes, grooves, and grooves in solid wood. It is mainly related to furniture production.Although using a woodworking boring machine can significantly improve production efficiency and save a lot of workforce, a large-scale production machine, woodworking boring machines inevitably has specific safety hazards during the work process. To prevent safety accidents in the production process, the following are some matters needing attention.
Production outline and operator specification
1. Safety production, adhere to safety first and prevention first;
2. Safety production is people-oriented, and employees enjoy equal rights in safety production;
3. Operators of the woodworking boring machine shall receive training, understand the structure, performance, and use of the method of mechanical equipment, and master the safety technical knowledge of use, maintenance, and maintenance. Professional electricians must eliminate circuit faults;
4. The woodworking boring machine shall be tested before the operation and can be operated only after all parts are usually operated. Before starting the machine, the sundries around the woodworking boring machine and the operation area under your feet must be cleaned up, and mats must be laid in the operation area if necessary;
5. Operators of the woodworking boring machine should dress appropriately: do not wear loose clothes, ties, and hand decorations (helmets should be worn for long hair). Female workers should wear work hats. When working, fasten the cuffs, trim the corners, and button up the buttons;
Safety precautions for woodworking boring machine
1. In case of failure during mechanical operation, stop the machine immediately and cut off the power supply;
2. Chain, gear, belt, and other transmission parts must be equipped with a protective cover or protective plate;
3. One-way switch must be used instead of the reverse switch;
4. It is strictly prohibited to set off fireworks and firecrackers in the workplace, and fire prevention equipment must be equipped;
5. The shavings and sawdust on the woodworking boring machine should be cleaned in time. Direct hand cleaning is strictly prohibited. Shavings and sawdust shall be stored in designated places;
6. Cut off the power supply and lock the gate after operation;
7. If the wood is stuck on the saw blade, the power supply should be cut off immediately, and the machine should be shut down before processing. It is forbidden to use the woodblock or stick to brake the saw blade and stop the mechanical rotation;
8. Employees shall carefully study and implement the safety technical operation procedures in production and work and abide by various rules and regulations. Take good care of production equipment, safety protection equipment, facilities, and labor protection articles. If it is found unsafe, report to the leader in time and eliminate it quickly.
The above are some safety problems that need to be paid attention to when using a woodworking boring machine.