Precautions for operation of High Speed Computer Panel Saw
The
High Speed Computer Panel Saw is dynamically or statically balanced and normally does not require a foundation, but can be placed on a flat surface. During the machining operation, the workpiece is placed on the moving table, and the moving table is pushed manually so that the workpiece can achieve the feeding motion. The operation is very convenient, flexible and mobile. When using the machine, you should always pay attention to safety and prevent accidents.
Matters needing attention when using High Speed Computer Panel Saw
1. The plate should be close to the backstop and should not be moved.
2. Adjust the opening speed according to the thickness and hardness of the plate, and push the machine at a uniform speed, not too fast and too hard.
3. When opening small material, apply the wooden bar to press the advance.
4. The operator should wear a mask, no gloves, no loose clothes and no long hair.
5. Do not take things directly by hand to the rotating saw blade, if necessary, use other long auxiliary materials to push it away first and then take it.
6. If there are defects in the edges of the opened sheet, consider replacing the saw blade.
7. After the cutting task is finished, turn off the power and do the cleaning and other work on the saw table and the surrounding area.
Maintenance of High Speed Computer Panel Saw
1. According to the workload, the machine should be dusted regularly to ensure the normal heat dissipation of the motor.
2 . Regularly dust the track of the push table to ensure the smooth operation of the push table.
3. regular inspection of the belt, found wear and tear should be replaced in a timely manner
4. Regularly oil the lubrication parts of the machine to ensure the stability and quiet operation of the equipment